Description
XS Power XSP320-313
Description
12 Volt Systems
If the VCM is being used on a standard 12 volt system, set the dip switches to the below settings. This will configure the VCM to the specific application this harness is designed for and will not allow voltage adjustments to exceed 15.2 volts.
14 & 16 Volt Systems
If the VCM is being used on a 14 or 16 volt system or a custom 12 volt system, set the dip switches to the below settings. This will configure the VCM to the specific application this harness is designed for and will not allow voltage adjustments to exceed 19.5 volts.
General Features:
-
< li >TYPE: Controller and Harness for GM “D” & “AD” 4 Pin Alternators (1995 to 2008)
< li >Operating voltage: 10~20 volts
< li >12V battery dip switch setting: 14.2 (varies depending on alternator) to 15.2 volts (programmed limit)
< li >14V & 16V battery dip switch setting: 14.2 (varies depending on alternator) to 19.5 volts (programmed limit)
General Safety Precautions
If using the VCM with a 12 volt XS Power battery, NEVER exceed 14.9 volts.
The high voltages allowed by this mode can damage batteries or other components not designed for excessive voltage. XS Power is in no way responsible for any damage from the use of this product. Contact all electrical component manufacturers to determine the maximum safe voltage when using this product in your vehicle. If using the VCM with an XS Power battery, NEVER exceed these voltages: 12V Batteries (14.9V MAX), 14V Batteries (16.9V MAX), 16V Batteries (19.5V MAX).
Reviews
There are no reviews yet.