Description
XS Power SB75-925L
Environmental Description
For best results SuperBANKS should not be exposed directly to the environment, particularly the avoidance of direct splashes should be considered. In systems with voltages greater than 60V it is highly recommended to use the included protective terminal caps. SuperBANKS that are expected to see significant cycling should be mounted in free air or in a forced ventilation housing. Care should be taken to protect SuperBANKS in potentially corrosive environments and direct water splash or spray should be avoided. In all environments the best possible performance is aided by using an anti-oxidation agent for all terminal connections.
General Features:
-
< li >TYPE: 12V Super Capacitor Bank
< li >Max Amps: 1500A
< li >Max Power: 600 Watt
< li >Length: 6.5″
< li >Height: 4.92″
< li >Width: 6.93″
< li >Farads: 75F
Safety
Never touch the power terminals as any residual voltage can cause fatal electrical shocks. Always check with a calibrated meter that the SuperBANK is discharged prior to handling the SuperBANK, please see the step by step instructions in this manual for the discharge procedure.
Carefully observe the polarity each time you connect to it, DO NOT REVERSE POLARITY
Prior to installation or removal the SuperBANK must be properly discharged.
Provide sufficient electrical isolation for operation above 50VDC (relative to ground).
Protect surrounding electrical and conductive components from incidental contact.
Do not operate above specified voltage or temperature range
Do not touch terminals while charged, serious burns, shock or material fusing may occur.
Reviews
There are no reviews yet.