Rydeen BSS3

We are a Rydeen authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What’s Inside?

< li > High Accuracy Digital Microwave Radar Technology

< li > Two color options for LED indicators for visual alerts

< li > Buzzer speaker for audible alerts

< li > GPS Antenna Included for Speed Sensing

< li > No drilling required

< li > Cross Traffic Alerts while Reversing

< li > Not applicable with metal bumpers (See BSS2LPB)

< li > Sensor Operating Frequency: 24GHz

< li > Transmit Powery: 15dbm

< li > Detection Ability: 5 targets can be detected at the same time

< li > Detection Speed Range: 0.5mph137mph

< li > Speed Accuracy: <0.5mph

< li > Speed Restriction: 1. There are 4 speed restriction options; 5 mph, 10 mph, 15 mph, 20 mph. Default is 20 mph. 2. If no GPS signal is detected or satellites not found, the system will be active at any speed.

< li > Direction of Movement/Alerts: Alerts for Approaching Vehicles

< li > Operating Voltage: 918V

< li > Waterproof (Radar Sensor) Radars: IP67 / Cables: NOT waterproof

< li > Working Current: < 200mA

< li > Working Temperature: -20C to +70C

< li > Installation Angle: -20(Horizontal)

< li > Gain: 12k

Microwave Radar Technology

This model is based on microwave radar technology for extended distance and sensitivity. Our BSS3 kit adds an extra set of eyes and warns the driver if there are any vehicles approaching in either blindspot before and during a lane change maneuver. Our system uses GPS to initiate operation above 20 MPH eliminating potential fault alerts.

Reverse Cross Traffic Alerts

Kit also includes newly revised Reverse Cross Traffic Alerts for backing/reversing out of a tight space when visibility is limited while vehicles are approaching from left or right side.