MB Quart FA1-900.5

Features:

• Low Noise Preamplifier Circuitry –Q-stasis Pre Amplifier Stage: Maximum Low Voltage Signal From The Source Unit Comes Into The Amplifier Circuit With Minimal Distortion
• Rca InputsNickel Plated –High Temperature Impact Resistant With Hex Screw Terminals That Allow For Secure Connections And Is Erosion Resistant
• Hi Level InputsDc Signal Sense –The Dc Signal Sense Switch Will Allow The Amp To Turn On When A Signal Is Received On The Rca Inputs, So An Amplifier Remote Turn On Wire Is Not Needed To Turn On The Amplifier. This Feature Can Also Be Turned Off.
• Operation Mode –5 Channel Operation
• Crossover Type –Variable Electronic Crossovers Allow For Complete Control Of The Sound
• Electronic Equalizer –Control Of Amplifier Output With On-board Electronic Crossover To Tailor Specific Frequencies To Speakers And Subwoofers. Check Specifications For Specific Frequencies For This Amplifier.
• Class / Topology – Innovative Use Of Class Sq (Class A/b) For Full Range And A Class Q1 (Class-d) Amplifier To Drive The Subwoofer Frequencies
• Output Device Technology – Fluid-fets: Mb Quart Output Devices, Fluid-fets Are Painstakingly Selected For Their Ability To Efficiently Produce Power And Mimic The Sound Quality Of The Highest End Home Amplifiers.
• Heat Sink – Heavy Duty Heat-sink Efficiently Moves Heat From The Mosfet Where It Can Be Cooled
• Power Supply – Rugged Mosfet Pulse Width Modulation Power Supply: Allows Amplifier To Product Efficient Power Without Taxing The Vehicle Electrical System
• Output Connections – Heavy Duty Connections Allow For Secure Electrical Signal To Pass Into Wiring And Resist Erosion Which Will Add Longevity To The Amplifier
• Connection Type – Secure Connection For All Power, Ground And Speaker Connections.
• Led System Protection Circuitry Diagnostics – Monitor Overload And Speaker Short Protection With Illuminated Indicators On The Amplifier End Panel
• Bass Remote Included – Included On Mono And 5 Channel Amplifiers. This Allows The Driver To Make Subtle Changes To The Bass Respond Of The Audio System From The Seated Listening Position.

Specifications:

• Class: Class Sq + Class Q1 Mono (Class A/B + Class D)
• Total Channels: 5
• Power @ 1 Ohm: 1 X 500 (Channel 5 Only)
• Power @ 2 Ohms: 4 X 100 Watts + 1 X 350 Watts
• Power @ 4 Ohms: 4 X 60watts + 1 X 250 Watts
• Crossover: Electronic
• Variable High Pass Crossover 12db Per Octave
  • Ch1 & Ch2: Switched, Full / Hpf, 50hz – 500 Hz
  • Ch3 & Ch4: Switched, Full / Hpf, 50hz – 250hz
• Variable Low Pass Crossover 12db Per Octave: Ch5 (Sub): 50hz – 250hz
• Bass Boost: 0-12db
• Subsonic Filter: 10hz – 40hz
• Variable Voltage: .02 – 9v
• Signal To Noise: >93
• Frequency Response: 10hz-45khz
• Total Harmonic Distortion (Thd): <0.5%
• Speaker Level Audio Inputs: Rca Jack
• Power Terminal 12v/gnd: 4 Awg
• Speaker Terminal Wire Gauge: 12 Awg
• Fusing: 40a X 2

• UPC: 806576230137
• Weight: 10
• Authorized Internet Dealer