Kenwood Excelon X502-1 + P-XW1221D

X502-1X Series 1000 Watts Max Power Class D Mono Subwoofer Amplifier

Features:

CTA-2006 Primary Ratings

• Power Output: 300 Watts RMS x 1 at 4 Ohms and 1%THD+N
• Signal-to-Noise Ratio: 85dBA (Reference: 1Watt into 4Ohms)

Maximum Power Output:

• MAX POWER: 1000W

Rated Power Output at 14.4V

• A/B (4 Ohms): –
• A/B (2 Ohms): –
• SUB (4 Ohms): 300Watts RMS x 1 (4 Ohms, 20-200Hz, 0.5% THD)
• SUB (2 Ohms): 500Watts RMS x 1 (2 Ohms, 100Hz, 0.5% THD)
• A/B (Bridged 4Ohms):

Specifications

• Signal to Noise Ratio: 100dB (Reference: Rated Power into 4Ohms at 14.4V)
• Frequency Response: 20Hz-200Hz (+0dB, -3dB)
• Input Impedance: 10k ohm
• Speaker Impedance: 4 (2 to 8 allowable)
• Bridged Connection: –

Audio Section

• Low-Pass Filter: 50Hz-200Hz, -24dB/oct
• High-Pass Filter: –
• Bass Boost: 40Hz, 0dB – +18dB
• Infrasonic Filter: 25Hz, -24dB
• RCA Input Sensitivity: 0.2[V] – 5.0 [V]
• Speaker Level Input Sensitivity: 4.0[V] – 12.0 [V]

Terminals

• Battery & Ground: M6 Screw Type Terminal Block
• Speaker Output: M4 Screw Type Terminal Block

General

• Dimensions(WxHxD): (W)8-3/8 x (H)2-1/16 x (D)5-7/8
• Dimensions(WxHxD): (W) 213cm x (H) 53cm x (D) 149cm
• Weight: 3.3 lbs ( 1.5kg)
• Operating Voltage: 14.4V(11-16V allowable)
• Current Consumption: 25 [A]

Key Features

• CTA-2006 Compliant
• 2 Ohms Load Capability
• One Sided Connection
• Speaker Level Input with Signal Sensing Turn-on
• Signal Sensing Turn-On

Accessorries

• Remote Level Control Ready ( Optional KCA-RC01A)
• Terminal Cover
• Power MOS-FET Switching Power Supply
• Extruded Aluminum Heat Sink Design

P-XW1221DExcelon Series Dual 12 600W RMS (2000W Peak Power Handling) 2-Ohm Pre-loaded Subwoofer Enclosure

Features:

• Polypropylene Cone with Diamond Array Pattern Woofers
• Input Power: 600W RMS, 2000W MAX
• Freq. Response: 31Hz-300Hz
• Final Impedance: 2
• 35-3/4 W x 15-13/16 H x 15-13/16 Bottom Depth / 12-9/16 Top Depth

• UPC:
• Weight: 69
• Authorized Internet Dealer