JL Audio RD1000/1-Bundle2: Refurbished 1000W Monoblock Amp + 10″ 750W Subwoofer

RD Series 1000W x 1 RMS @2Ohms, Class D Monoblock Full-Range Car Amplifier

Features:

• mono subwoofer amplifier
• 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms)
• Class D amplifier design with NextD switching amp technology
• differential-balanced inputs help eliminate noise
• variable low-pass filter (50-500 Hz, 12 dB/octave)
• variable bass boost (0-12 dB at 45 Hz)
• LED clip light helps set gain
• blue LED accent lighting
• optional wired remote level control
• preamp inputs and outputs
• speaker-level inputs (speaker wire to RCA adapter required)
• 4-gauge power and ground leads and a 80-amp fuse recommended wiring and hardware not included with amplifier
• no onboard fuses when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended
• 14-5/8″W x 2-3/16″H x 7″D

Specifications:

• Frequency Response: 7 Hz – 500 Hz (+0, -1dB)
• S/N Ratio, referred to highest rated power: >80 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W: >50 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
• Damping Factor @ 4 : >1000 / 50 Hz
• Damping Factor @ 2 : >500 / 50 Hz
• THD+N @ Rated Power: <1% @ 2 per Ch.
• Input Voltage Range @ RCA Inputs: Switchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High)
• Min.Copper Power / Ground Wire Gauge: 4 AWG wire
• Fuse Rating: 80 A (AFS, AGU or MaxiFuse)
• Filter Mode(s): Low-Pass only
• Filter Slope(s): 12 dB/octave
• Filter Frequency Range: 50 Hz – 500 Hz
• Detented, Calibrated Filter Freq. Potentiometer: No
• Filter Defeat Function: No
• Infrasonic Filter: No
• Bass Boost EQ: Yes
• Output Polarity Switch: No
• Remote Subwoofer Level Control Optional (RBC-1)
• Remote Bass EQ Boost Control: No
• Pass-Through Preamp Output: Buffered
• Height (H): 2.13 in / 54 mm
• Width (W): 14.66 in / 372 mm
• Depth (D): 6.96 in / 177 mm

Rated Continuous (RMS) Power @ 14.4 V

• @ 4 Ohms: 600 W RMS x 1
• @ 3 Ohms: 800 W RMS x 1
• @ 2 Ohms: 1000 W RMS x 1
• @ 1.5 Ohms: N/A

Rated Continuous (RMS) Power: @ 12.5 V

• @ 4 Ohms: 500 W RMS x 1
• @ 3 Ohms: 650 W RMS x 1
• @ 2 Ohms: 800 W RMS x 1
• @ 1.5 Ohms: N/A

JL Audio 10W7AE-3Anniversary Edition W7 Series 10″ 750W RMS (1500W Peak Power Handling) Single 3 Ohms Voice Coil Car Audio Subwoofer

Features:

• 10″ 3-ohm subwoofer
• polypropylene W-Cone with polyester foam surround
• solid cast-alloy basket
• no grille included: optional grille rods available
• power range: 250-750 watts RMS
• peak power handling: 1500 watts
• frequency response: 20-250 Hz
• sensitivity: 84.3 dB
• top-mount depth: 8-1/16″
• sealed box volume: 1.25 cubic feet
• ported box volume: 1.5 cubic feet

Specifications:

• Size: 10 -inch
• Impedance (Ohms): 3
• Cone Material: Polypropylene
• Sensitivity: 84.3 dB at 1 watt
• Frequency Response: 20 – 250 Hz
• Max RMS Power Handling: 750
• Peak Power Handling (Watts): 1500
• Top Mount Depth (inches): 8 1/8
• Cutout Diameter or Length (inches): 8 3/4
• Vas (liters): 36.1
• Fs (Hz): 30.6
• Qts: 0.537
• Xmax (millimeters): 23
• Ideal Sealed Box Volume (cubic feet): 1.25

• UPC:
• Weight: 40
• Authorized Internet Dealer