iDatalink HRN-RR-SU1 Plug and Play T-Harness for SU1 Subaru Vehicles

We are a iDatalink authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What’s Inside?

< li >Radio/vehicle harness

< li >Sub harness

< li >Backup camera harness

< li >Jumper harness

< li >Blue/white wire harness

< li >OBDII harness

< li > User’s Manual

Allows You to Connect a New Idatalink-ready Car Stereo

Working in conjunction with the Maestro ADS-MRR or ADS-MRR2 module, iDatalink’s HRN-RR-SU1 interface harness allows you to connect a new iDatalink-ready car stereo in select 2008-14 Subaru vehicles. Once connected. You’ll retain the use of your steering wheel audio controls, your Subaru’s amplifier and subwoofer (including the fader), and the factory back-up camera in these vehicles.

Includes Connectors That Plug in Between the Maestro Module

This installation harness will not work with car stereos that do not feature an iDatalink serial port. The package includes connectors that plug in between the Maestro module and your Subaru radio’s wiring plugs. You’ll have to solder or splice together this harness’s power/ground, illumination, speaker, and navigation output wires to the corresponding wires on your aftermarket receiver’s wiring harness.

Be Able to Read and Reset the Vehicle’s Check Engine Codes

With your iDatalink-ready car stereo, you’ll be able to set up gauges on your receiver’s screen to monitor engine performance, tire pressure, and other functions. You’ll also be able to read and reset the vehicle’s Check Engine codes.allows installation of a new iDatalink-ready receiver in select Subaru models (also requires the Maestro ADS-MRR or ADS-MRR2 module)