Sale!

Hertz MPK1650.3 Mille Series 6.5″ 250W Peak Power Handling 3 Ohms 2-Way Component System

$99.00 $799.99
Review

Hertz MPK1650.3 Mille Series 6-1/2" 125W RMS (250W Peak Power Handling) 3-Ohm Impedance 2-Way Component System We are a Hertz authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you orde

  • Satisfaction 100% Guaranteed
  • Free shipping on orders over $30
  • 60 day easy Return

Qty:

SKU: MPK1650.3 Categories: , ,

Description

Hertz MPK1650.3 Mille Series 6-1/2″ 125W RMS (250W Peak Power Handling) 3-Ohm Impedance 2-Way Component System


We are a Hertz authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What’s Inside?
    < li > (2) Speakers w/ Grilles

    < li >(2) Tweeters

    < li >(2) Crossover networks

    < li >(12) Mounting screws

    < li >Owner’s Manual

Achieving a Resonance Frequency of Only 900 Hz

The MPK 1650.3 car audio speakers system is the top of the range two way system of the Mille PRO line. The system uses the 28 mm diameter MP 28.3 tweeter inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz.

Crossover Point

In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28 kHz, a record for a tweeter featuring a 28 mm voice coil.

Elegant and Compact Angled Tweeter Support

An elegant and compact angled tweeter support is provided with the system: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.

The MP 165P.3 woofer electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 stable electronics.

Ensuring Utmost Control at All Times

The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations.

The crossover MPCX 165.3 creates the optimal tone balance between the MP 28.3 tweeter and MP 165P.3 woofer. It features bi-metallic capacitors with polyester dielectric, for maximum acoustic transparency and air wound inductors built on pure copper wire with up to 1mm diameter eliminating saturation. It also mounts wire-wound type resistors with low parasite inductance.

SPECIFICATIONS


Features:

MP 28.3:

  • Double Neodymium magnet optimized with FEA simulations, for maximum field symmetry and exceptional transfer efficiency.
  • Tetolon Fiber dome optimized with FEA simulations, for excellent dynamicsand angle dispersion.
  • Larger rear chamber, to reduce Fs down to 900Hz.
  • Natural fibre non-woven sound-absorption material, for better damping and more natural acoustic emission.

MP 165P.3:

  • 13 ohm nominal impedance to exploit all the amplifiers power.
  • 2. 4 mm height pure copper voice coil wound on a Polyamide former, for
  • exceptional power handling.
  • 95 mm diameter magnet to maximize the control over the whole excursion.
  • Exponential V-cone profile pressed-pulp cone with cotton fibers,
  • combining stiffness and lightweight for a wide frequency response.
  • Cone profile geometrically optimized for utmost linearity and dispersion in
  • the mid frequency range.
  • Boundary Free rubber surround, for improved efficiency and wider
  • mid-bass frequency. Low mounting depth, acoustically transparent aluminium alloy basket with
  • elegant diamond cutting and featuring the aluminium Hertz logo.
  • Full protection metal mesh grill featuring the aluminium Hertz logo and
  • attractive look mineral powder coated inner grill are included for several
  • install combinations.

MPCX 165.3:

  • Hi-Contour two-position control, to select the tweeter hi-pass crossover
  • point according to the tweeter position/angle towards the listener.
  • Three terminals for tweeter level adjustment in 2 dB steps, to fine-tune thetransducers emission.
  • Extremely high quality bi-metallized 160V polyester film capacitors with
  • ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies.
  • Air wound inductors built on pure copper-wire with up to 1mm diameter,
  • for low losses on the woofer section where high transient currents are
  • demanded.
  • High power rating Wirewound resistors, to ensure performance stability
  • even at high operating temperature. The Wirewound build construction
  • grants low parasitic series inductance thus reducing losses at high
  • frequencies, especially for resistors in series to the tweeter.

Specifications:

  • Power Handling – Peak W: 250
  • Power Handling – Continuous W: 125
  • Impedance: 3 ohms
  • Frequency response Hz: 45 25k
  • Sensitivity dB SPL: 93
  • Voice coil mm (in.): 25 (1)
  • Woofer size mm (in.): 165 (6.5)
  • Tweeter size mm (in.): 35 (1.38)
  • Woofer magnet: High density flux ferrite
  • Tweeter magnet: Neodymium
  • Woofer cone: Pressed-pulp cone with cotton fibers
  • Tweeter dome: Tetolon
  • Crossover type: 2 Way Passive Crossover
  • Crossover cut off: 3 kHz (Hi-Cont. = ON) , 4 kHz (Hi-Cont. = OFF)
  • Number of Speakers : 2 Woofers + 2 Tweeters
  • UPC: 8018823120975
  • Weight: 12
  • Authorized Internet Dealer

WARRANTY

Reviews

There are no reviews yet.

Be the first to review “Hertz MPK1650.3 Mille Series 6.5″ 250W Peak Power Handling 3 Ohms 2-Way Component System”

Related products

Sale
$80.00 $159.99
Sale
Sale
$100.00 $429.99