Aunex AP800.1D-Bundle4 Monoblock Amplifier + (2) Pioneer Subwoofers + Amplifier Wiring Kit

AP800.1DAP Series 800W x 1 RMS @4Ohms, 1600W Max Power Class D Monoblock Amplifier

Features:

• Heavy Density Aluminum Extruded Heatsink
• 2 Layer PCB, SMD Technology
• Differential Balanced RCA Inputs
• Fully Variable Crossover: 30Hz – 500Hz @ 24dB/Octave Slope
• Fully Variable Infrasonic Filter: 10Hz – 50Hz @ 24dB/Octave
• Boost Eq. 0 – 18dB @ 45Hz Center
• Auto-Sensing in High-Level Input Mode
• Power and Protection Logo Illuminated Status Indicator
• 4 Gauge Power and Ground Terminals
• 12 Gauge Speaker Output Terminals
• Advance Protection Circuit Monitoring: Short, Thermal, Overload, And Impedance
• Finish: Anodized with Texture Paint

Specifications:

• Channels: 1
• Rated RMS Power 4 Ohms Mono @ 14.4V: 300 Watts x 1
• Rated RMS Power 2 Ohms Mono @14.4V: 600 Watts x 1
• Rated RMS Power 1 Ohm Mono @ 14.4V: 800 Watts x 1
• Peak Music Power: 1600 Watts
• Frequency Response: 10Hz – 500Hz
• THD + Noise: <0.5%
• S/N Ratio A-Weighted: >105dB
• Input Sensitivity (Low Level RCA): 250mV – 6V
• Input Sensitivity (High Level Speaker Output): 450mV – 11V
• Crossover Low Pass (24dB/Octave): 50Hz – 500Hz
• Boost EQ Low Pass – 45Hz Centered: 0 – 18dB
• Infrasonic Filter: 10Hz – 50Hz
• Phase – Fully variable: 0 – 108
• Efficiency @ 4 Ohm: 85%
• Operating Voltage: 9 – 17 Volts
• Fuse Requirement: 80A (Included)
• Dimensions (H x W x D): 2.0″ x 8.5″ x 7.2″

(2) TS-A120S4EA Series 12 400W RMS (1400W Peak Power Handling) Single 4 Ohms Voice Coil Impedance Car Subwoofer

Features:

• Pioneers A-series sound design purposely matches the subwoofer and full-range loudspeakers to provide seamless and smooth sound characteristics with dynamic, high impact bass that lets you hear and feel the music.
• Specially designed voice coil offers higher power handling, linear movement and greater excursion for extreme bass output.
• Cone provides increased strength and rigidity for optimized bass response.

Specifications:

• System Type: Component Subwoofer
• Sensitivity (1W/1m): 87 dB
• Frequency Range: 22 Hz to 1.6 kHz
• CTA-2031 Compliant: Yes
• Warranty: 1 Year
• Continuous Power handling (RMS) – Watts: 400 Watts
• Maximum Peak Power Handling – Watts: 1400 Watts
• Nominal Impedance – OHM: 4
• Shape: Round
• Size: 12″
• Cone Material: IMPP – Composite
• Center Cap Material: ABS
• Surround Material: Rubber
• Surround Type: Rolled
• Basket Material: Stamped Metal
• Magnet Material: Ferrite
• Magnet Weight: 46 oz
• Voice Coil Type: Single Voice
• Voice Coil Bobbin: Alminum
• Voice Coil wire: Copper
• Damper: Poly cotton Aramid
• Gasket: PP
• Wire Terminals: Push Type
• Unit Size (Dimensions): 12-1/2″
• Mounting Depth: 5-3/8″
• Cut Out dimensions: 11-1/8″
• Equivalent Compliance (VAS) [L]: 56.1
• Free Air Resonance (Fs) [Hz]: 32.1
• Total Speaker “Q” (Qts): 0.7
• Linear Excursion (Xmax) [mm]: 8.25
• Recommended Sealed Box Volume [L]: 35.4
• Port Box volume [L]: 42.5
• Port Length: 6-1/2″
• Port Diameter: 3″

AE-8KElite Series 8 Gauge Amplifier Wiring Kit OFC Copper

Features:

• High-performance quality and convenience make this amplifier wiring kit essential for the discerning mobile audio enthusiast.
• Aunex Elite accessories exceed the American Wire Gauge (AWG) standard as they are overbuilt to supply the necessary current for high power
• high-performance audio systems while being low resistance for maximum current transfer.
• AE cables use 100% Tinned Oxygen-Free Copper (OFC) which is both corrosion and rust-resistant and is the perfect choice for Marine installations.
• The AE Series further adds 4 layers of advanced shielding to reject unwanted noise from entering through the audio signal path.
• Audio signal is transferred through premium gold-plated RCA Interconnects and also incorporates advanced twinning techniques which result in pure audio signal being sent from your source unit to your amplifiers.

• UPC: 798418840706
• Weight: 26
• Authorized Internet Dealer