Audison AP5.9 bit

Power Supply:

• Voltage: 7.5 15 VDC
• Idling current: 1.5 A
• Switched off: <1.4 mA
• Consumption @ 14.4 VDC 2 ohms Max Musical Power (without CPL): 30 A
• Remote IN 7 15 VDC (1 mA)
• Remote OUT 11 15 VDC (200 mA)
• Fuse 30 A
• ART (Automatic Remote Turn on/off) Speakers to input – selectable
• AST (Automatic Signal Turn on/off) Pre-In to input – selectable
• CPL (Continuous Power Limiting) Max continuous power – selectable

Amplifier Stage:

• Distortion – THD @ 1 kHz, 4 , 90% Output Power (Ch 1-2-3-4): 0.08 %
• Distortion – THD @ 1 kHz, 4 , 90% Output Power (Ch 5): 0.1 %
• Bandwidth (-3 dB, 2 V RMS, 4 ohms): 10 20k Hz / 10 500Hz SUB
• S/N ratio @ A weighted, 1V, Max Power: 95 dBA
• Damping factor @ 1 kHz, 2 V RMS, 4 ohms: >70
• Input sensitivity: 2 15 V RMS
• Input impedance: 15k ohms
• LOAD IMPEDANCE (MIN):
• Ch: 1-2-3-4-5 2 ohms
• MAX POWER 530 W
• OUTPUT POWER (RMS) @ 12.0 14.4 VDC, 1% THD:
• 5 Ch @ 4 ohms: 20 W x 2 + 50 W x 2 + 150 W x 1
• 5 Ch @ 2 ohms: 40 W x 2 + 90 W x 2 + 270 W x 1
• OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
• 5 Ch @ 4 ohms: 25 W x 2 + 60 W x 2 + 190 W x 1
• 5 Ch @ 2 ohms: 50 W x 2 + 115 W x 2 + 350 W x 1

Digital Signal Processor(32 bit Cirrus Logic; Clock speed: 147 MHz):

• Crossover: Full / Hi Pass / Lo Pass / Band Pass
• Crossover type and slope: Linkwitz @ 12/24 dB – Butterworth @ 6/12/18/24 dB
• Crossover Frequency: 68 steps @ 20 20k Hz
• Phase inversion: 0 / 180
• Analog Input Equalizer: Automatic De-Equalization
• Output Equalizer: N.9 Parametrics Equalizers: 12 dB; 10 pole; 20 20k Hz
• Time Alignment Distance 0 510 cm / 0 200.8 in.
• Time Alignment Delay 0 15 ms
• Time Alignment Step 0,08 ms; 2,8 cm / 1.1 in.
• Time Alignment Fine Set 0,02 ms; 0,7 cm / 0.27 in.
• SYSTEM SET:
• Preset (Drive Preset) Rotary switch for 7 installation Presets
• Acoustic Preset N.2 DSP Memory, DRC selectable

Control Connections:

• From / to personal computer 1 x micro USB-B
• To Audison Electronics DRC controls
• ASP For module: Automatic Speaker Presence
• Optical / AUX select 12V control for Optical In / AUX enable
• Master enable 12V control for Master In enable

General Requirements:

• PC connections Micro USB (1.1 / 2.0 / 3.0)
• Software/PC requirements: Microsoft Windows (32/64 bit): XP, Vista, Windows 7, Windows 8
• Graphic card min. resolution: 800 x 600
• Ambient operating temperature range: 0 C to 55 C (32F to 131F)

Size / Weight:

• Max size (mm/in.): 198 x 45,50 x 134 / 7.8 x 1.8 x 5.27
• Weight (kg/lb): 1.5 / 3.3

CEA Specifications

• Output power @ 4 ohms, lessthan/equal1% THD+N, 14.4 V: 20 W x 2 + 50 W x 2 + 150 W x 1
• SN ratio (ref. 1 W output): 80 dBA

Signal Connections

• Input Stage:
  • Config 1: Hi / Lo level FL-FR-RL-RR + N.2 customizable
  • Config 2: Hi / Lo level FL-FR-RL-RR + Stereo Aux In (Selectable: DRC/select.)
  • Optical IN: (max 96kHz/24bit) S/P-DIF PCM 96 kHz/24 bit max (Selectable: DRC/select.)

• UPC: 8018823113762
• Weight: 8
• Authorized Internet Dealer