AudioControl ACX-300.1

Features:

• Overview: The AudioControl ACX-300.1 all-weather amplifier is a compact mono amp designed for your boat, ATV, UTV, motorcycle, and more. The all-weather amp can provide 175 watts RMS into a 4? load and 300 watts RMS into a 2? load. The ACX-300.1 also features both RCA line-level and speaker-level inputs, making it ideal for OEM and aftermarket headunits.
• High-/Low-Level Inputs: The ACX-300.1 includes two built-in 12″ RCA inputs that can accept either high- or low-level input signals. If running high-level signals, RCA to speaker-wire adapters must be used (sold separately), or the RCA connectors must be cut off and the bare-ended wire used.
• AccuBASS: The patented AccuBASS processing circuit compensates for factory bass rolloff to improve bass performance, especially with most factory installed sound systems. The circuit has two rotary controls: the Threshold lets you dial in the level at which the AccuBASS will begin to work, and a Level control that adjusts the amount of AccuBASS compensation.
• Crossovers: The ACX-300.1 includes a 12 dB/octave Linkwitz-Riley low-pass filter with a 3-position switch to change the crossover point. Choices include 80Hz, 120Hz, or Bypass.
• Gain Maximized LEDs: The mono amp’s inputs include a Gain control to the properly set the overall output level. A Maximized LED indicator will light to let you know when the output signal has reached its optimum performance level, helping to avoid running a distorted signal to your speakers.
• GTO (Great Turn On) Signal Sense: If you are connecting the amplifier to a factory stereo, or an aftermarket unit without preamp outputs and a remote turn-on lead, the GTO Signal Sense circuitry can turn on the amplifier when an audio signal is detected on either the line-level or speaker-level inputs. After a period of time with no signal input, the amp will turn itself off.
• Optional Wired Remote Control: The ACX-300.1 amplifier features a female 3.5mm jack on a built-in 12″ harness, letting you connect an optional ACR-1 wired remote control (sold separately). A 16.5′ ACR-1 connection cable is provided, with a male 3.5mm connector on one end and an RJ-14 connector on the other end, that connects to the wired controller.
• All-Weather Construction: The ACX-300.1 amp has been constructed to withstand outdoor environments and carries an IPX6 waterproof rating, making it impervious to weather. A removable cover-plate on top of the amp protects the controls and LED indicators from dust and moisture ingress. The cover-plate screws require a 2.5mm hex bit for removal (not included). All wire harnesses on the amp are built-in for added weather resistance
• Mounting: The AudioControl ACX-300.1 features built-in mounting flanges on either end of the amp, with two pre-drilled holes in each, allowing the amp to be mounted in a variety of locations. Four 3/4″ screws are provided for mounting.

Specifications:

• 1 x 300 watts @ 2 ohms
• 1 x 175 watts @ 4 ohms
• Preamp/Speaker Level Inputs: 2
• Input Voltage Low: 500 mV 6 Vrms
• Input Voltage Range High: 1 Vrms 12 Vrms
• Frequency Response: 26 Hz 22 kHz
• Signal to Noise: 102 dBA, Ref 50 W @ 4 Ohm
• THD+N: < 0.05%
• Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass
• IP Rating: IPX6
• Recommended Fuse Rating: 30A
• Dimensions: 9.0W x 3.875D x 2.25H

• UPC: 851523007829
• Weight: 5
• Authorized Internet Dealer