Sale!

Alpine S2-A120M S Series 1200W x 1 @2Ohms Class D Monoblock Subwoofer Amplifier

$98.00 $449.95
Review

Alpine S2-A120M S Series 1200W x 1 @2Ohms Class D Monoblock Subwoofer Amplifier We are a Alpine authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order! What's Inside? < li >Mono s

  • Satisfaction 100% Guaranteed
  • Free shipping on orders over $30
  • 60 day easy Return

Qty:

SKU: S2-A120M Categories: , ,

Description

Alpine S2-A120M S Series 1200W x 1 @2Ohms Class D Monoblock Subwoofer Amplifier


We are a Alpine authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What’s Inside?
    < li >Mono subwoofer amplifier (four 25A ATO fuses installed)2 End caps

    < li >Four 3/4″ screws

    < li >Four 1/4″ screws

    < li >2.5mm Allen key

    < li >Owner’s Manual

Massive Bass Power

Alpine’s Next Generation S-Series S2-A120M mono subwoofer amplifier makes it a lot easier to get great bass in your ride, delivering up to 1200 watts RMS power to your sub. A variable bass boost allows you to dial in some extra kick and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.

More Convenient Features

A low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.

SPECIFICATIONS


Features:

  • mono subwoofer amplifier
  • 600 watts RMS x 1 at 4 ohms
  • 1200 watts RMS x 1 at 2 ohms
  • 1200 watts RMS x 1 at 1 ohm
  • variable low-pass filter (50-400 Hz, 24 dB/octave)
  • variable bass boost (0-12 dB at 50 Hz)
  • optional wired remote available
  • preamp and speaker-level inputs
  • speaker-level inputs handle up to 10V
  • RCA adapters required for speaker-level input
  • signal-sensing turn-on with speaker-level inputs
  • preamp outputs
  • wiring and hardware not included with amplifier
  • 4-gauge power and ground leads recommended
  • fuse rating: 25A x 4
  • 13.1″W x 2.25″H x 8.25″D

Specifications:

  • RMS Power Output (Watts x Channels): 600 x 1
  • Peak Power Output (Watts x Channels): —
  • Power at 2 Ohms (Watts x Channels): 1200 x 1
  • Bridged Power (Watts x Channels): —
  • Minimum Impedance Bridged: —
  • Minimum Impedance Unbridged: 1
  • Minimum Impedance: 1
  • Best Frequency Response: 20-400 Hz
  • THD at Rated RMS Power: —
  • Signal to Noise Ratio: —
  • Input Voltage: —
  • Amplifier Class: D
  • Low-Pass Crossover Frequency: 50-400 Hz
  • Low-Pass Slope (dB/octave): 24 dB/octave
  • High-Pass Crossover Frequency: —
  • High-Pass Slope (dB/octave): —
  • Bass Boost: 0-12 dB
  • Bass Boost Frequency: 50 Hz
  • Fan Cooled: —
  • Fuse Rating: 100
  • Speaker Level Inputs: Yes
  • Preamp Outputs: 2
  • Width (inches): 13-1/8
  • Height (inches): 2-1/4
  • Depth (inches): 8-1/4
  • Parts Warranty: 1 Year
  • Labor Warranty: 1 Year
  • UPC: 793276085153
  • Weight: 7
  • Authorized Internet Dealer

WARRANTY

Reviews

There are no reviews yet.

Be the first to review “Alpine S2-A120M S Series 1200W x 1 @2Ohms Class D Monoblock Subwoofer Amplifier”

Related products

Sale
Sale
$84.00 $279.99
Sale
$100.00 $459.00
Sale
$72.00 $239.99