Sale!

Alpine PSS-22WRA

$100.00 $1,699.95
Review

Alpine PSS-22WRA Direct Fit Weather Resistant Packaged Sound System For Jeep Wrangler 2015-2018 We are a Alpine authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order! What's Insi

  • Satisfaction 100% Guaranteed
  • Free shipping on orders over $30
  • 60 day easy Return

Qty:

SKU: PSS-22WRA Categories: , ,

Description

Alpine PSS-22WRA Direct Fit Weather Resistant Packaged Sound System For Jeep Wrangler 2015-2018


We are a Alpine authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What’s Inside?
    < li > SBV-10-WRA Powered subwoofer

    < li >103″ Main harness

    < li >8′ Power cable (inline 60A Maxi-fuse)

    < li >8″ T-harness

    < li >Three 10″ speaker to RCA adapters

    < li > Three 3/4″ bolts

    < li >(2) 6-1/2″ Woofers (attached 6″ speaker wire)

    < li > (2) tweeters (attached 6″ speaker wire)

    < li >(2) Crossovers

    < li >2 Woofer grilles

    < li >2 Tweeter mounting plates

    < li >(2) 12″ Sheets of polyfill

    < li >(2) Alpine logos with adhesive backing

    < li >(2) 1/2″ adhesive foam pads

    < li >Warranty information

    < li >Owner’s Manual

Premium Sound Upgrade

Looking for a premium sound system for your Jeep Wrangler JK? Look no further than the Alpine PSS-22WRA. Specifically designed for 2011-2018 Jeep Wrangler JK Unlimited models, this 1200-watt, 9-speaker sound system delivers outstanding sound performance both with the top on or off.

All-weather Durability

Don’t worry about being caught in inclement weather with the top off, as the PSS-22WRA is IP55 rated to withstand rain, wind, and dust. The subwoofer uses rust-resistant hardware and can handle water from off-roading adventures or a quick rinse down.

Designed the Restyle Line

Alpine designed the Restyle line for drivers who want to improve their sound but want to maintain the factory look of their vehicle. The PSS-22WRA sound system upholds this approach by including tweeter mounting gear suitable for a variety of locations. The woofers fit directly into your factory locations and in the case of the two amps, all wiring is included, complete with factory compatible plugs. Once the PSS-22WRA system goes in, you won’t even know it’s there… until you crank up the volume.

SPECIFICATIONS


Features:

  • 2x SPV-65X-WRA 6-1/2″ Component Speakers:
  • CTA-2031 Power Rating: 75W RMS, 225W Peak
  • Nominal impedance 4 Ohm
  • Frequency response 65-22kHz
  • 1″ Teteron dome tweeter
  • Steel frame with factory speaker mounting tabs
  • Weather resistant: IP55
  • Includes vehicle specific speaker connectors

KTA-30FW:

  • Alpine’s Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
  • Weather resistant (IP66 rating)
  • 150W x 4 D.P.P. (2/4, 14.4V, 1% THD+N)
  • CTA-2006-B Specifications: 75W RMS x 4 (2/4, 14.4V, 1% THD+N)
  • 82dB S/N (ref. 1W into 4)
  • >0.05% THD
  • Hi Resolution Audio Ready
  • OEM-grade Tyco 26-pin connector with pigtail wire harness
  • Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)

SBV-10-WRA

  • 10-inch subwoofer pre-loaded into a sealed, custom-fit enclosure
  • Designed to be pressure fit under the front passenger’s seat rails, no mounting hardware is required
  • Trail Ready – Rated at IP66 for protection against total dust ingress and water from any direction
  • OEM-grade weather resistant Molex 2-pin connector with pigtail wire harness
  • Nominal Impedance: 2 ohm
  • Frequency Response: 45-200Hz
  • The 300W RMS/900W max power rating is a match for the KTA-30MW Mono Tough Power Pack Amplifiers

KTA-30M-WRA

  • Class: D
  • Dynamic Pulse Power (DPP) Equipped: Yes
  • Power: 600W DPP x 1 @ 2, 14.4V, 1% THD+N
  • Root Mean Squared: 300W RMS x 1 @ 2, 14.4V, 1% THD+N (CTA-2006-B compliant)
  • Signal to Noise (1W into 4): >83dB
  • THD (ref. 1W into 4): <0.1%
  • Frequency Response: 20-400kHz (+/- 1dB)
  • Waterproof Rating: IP66 rating
  • Inputs: Speaker/RCA inputs (selectable, High range=0.5-10V, Low range=0.2-4V)
  • Sound Control: LP filter – Off/LP, Fc = 50-400Hz @ -24dB/Oct. (variable); Input gain settings (variable); Bass EQ: 0 to +12dB, Fc = 50Hz (variable)
  • UPC: 793276242105
  • Weight: 48
  • Authorized Internet Dealer

WARRANTY

Reviews

There are no reviews yet.

Be the first to review “Alpine PSS-22WRA”

Related products

Sale
Sale
$75.00 $150.00
Sale
$81.00 $269.99