Sale!

JL Audio 12TW1-2 TW1 Series 12″ Subwoofer 600W Peak Power 2 Ohm

$99.00 $449.99
Review

JL Audio 12TW1-2 12" 300W RMS Shallow-Mount 2 Ohm Component Subwoofer We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order! What's Inside? < li >(1) 12" Thin-L

  • Satisfaction 100% Guaranteed
  • Free shipping on orders over $30
  • 60 day easy Return

Qty:

SKU: 12TW1-2 Categories: , ,

Description

JL Audio 12TW1-2 12″ 300W RMS Shallow-Mount 2 Ohm Component Subwoofer


We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What’s Inside?
    < li >(1) 12″ Thin-Line subwoofer

    < li >Grille

    < li >Owner’s manual

Patented Thin-line Subwoofer

Belonging to JL Audio’s thin-line subwoofers, the JL Audio 12TW1-2 can put some earth-shaking bass output inside your vehicle without taking up too much space when installing it. With its 12-inch size, this shallow-mount subwoofer can take your car’s bass reproduction to a whole new level.

Has a Mica-filled Polypropylene Cone

It has a mica-filled polypropylene cone and a rubber surround, which gives the 12TW1-2 the rigidity and durability to withstand the effects of constant use at high volume levels while producing an accurate bass response with only minimal distortion.

Famous Concentric Tube Suspension

It utilizes JL Audio’s DMA-optimized motor design, which helps lessen the distortion while producing a clean and punchy low-frequency performance. It also has JL Audio’s famous Concentric Tube Suspension, which significantly improves the subwoofer’s excursion, allowing for more air pressure, and resulting in louder and better bass performance.

Has a Power Handling of 300 Watts RMS at 2 Ohms

The JL Audio 12TW1-2 has a power handling of 300 Watts RMS at 2 ohms. It has a frequency response of 24 up to 200 Hz and a sensitivity rate of 85.07 dB, allowing the subwoofer to go deep and loud with less noise.

SPECIFICATIONS


Features:

  • 12″ 2-ohm subwoofer
  • mica-filled polypropylene injection-molded cone with rubber surround
  • cast-alloy frame
  • power range: 75-300 watts RMS
  • peak power handling: 600 watts
  • top-mount depth: 4-5/8″
  • sealed box volume: 0.65 cubic feet
  • ported box volume: 1.125 cubic feet
  • Very shallow mounting depth (4.62 in / 117 mm)
  • No pole vent: permits mounting close to rear wall of enclosure
  • Extremely small sealed enclosure volume requirements
  • Long linear excursion capability (0.40 in / 10 mm, one-way)
  • DMA-optimized motor design
  • Patented “concentric tube” architecture
  • Patented “floating cone attach method” technology
  • Cast alloy frame with flat edges for tight driver grouping
  • Injection molded, mica-filled polypropylene cone
  • Rubber surround
  • Steel mesh grille included with each driver
  • Precision-built in USA at JL Audios Miramar, Florida factory with global components

Specifications:

  • Size: 12 -inch
  • Impedance (Ohms): 2
  • Cone Material: Mica-filled Polypropylene
  • Surround Material: Rubber
  • Ideal Sealed Box Volume (cubic feet): 0.65
  • Ideal Ported Box Volume (cubic feet): 1.125
  • Port diameter (inches): N/A
  • Port length (inches): N/A
  • Free-Air: No
  • Dual Voice Coil: No
  • Sensitivity: 85.07 dB at 1 watt
  • Frequency Response: 24 – 200 Hz
  • Max RMS Power Handling: 300
  • Peak Power Handling (Watts): 600
  • Top Mount Depth (inches): 4 5/8
  • Bottom Mount Depth (inches): N/A
  • Cutout Diameter or Length (inches): 11 1/16
  • Vas (liters): 28.54
  • Fs (Hz): 35.06
  • Qts: 0.577
  • Xmax (millimeters): 10
  • Parts Warranty: 1 Year
  • Labor Warranty: 1 Year
  • UPC: 699440921893
  • Weight: 19.01
  • Authorized Internet Dealer

WARRANTY

Reviews

There are no reviews yet.

Be the first to review “JL Audio 12TW1-2 TW1 Series 12″ Subwoofer 600W Peak Power 2 Ohm”

Related products

Sale
Sale
$84.00 $279.99
Sale
$81.00 $269.99
Sale
$72.00 $239.99