MB Quart FA1-400.4

Features:

• Low Noise Preamplifier CircuitryQ-stasis Pre Amplifier Stage –Maximum Low Voltage Signal From The Source Unit Comes Into The Amplifier Circuit With Minimal Distortion
• Rca InputsNickel Plated –High Temperature Impact Resistant With Hex Screw Terminals That Allow For Secure Connections And Is Erosion Resistant
• Hi Level InputsDc Signal Sense –The Dc Signal Sense Switch Will Allow The Amp To Turn On When A Signal Is Received On The Rca Inputs, So An Amplifier Remote Turn On Wire Is Not Needed To Turn On The Amplifier. This Feature Can Also Be Turned Off.
• Operation Mode –4 Channel Operation Mode Allows Either Stereo Or Mono Bridged Operation
• Crossover Type –Variable Electronic Crossovers Allow For Complete Control Of The Sound
• Electronic Equalizer –Control Of Amplifier Output With On-board Electronic Crossover To Tailor Specific Frequencies To Speakers And Subwoofers. Check Specifications For Specific Frequencies For This Amplifier.
• Class / TopologyClass Sq –Multi-channel Amplifiers Utilize The Unique Mb Quart Class Sq Topology. Matched With Q-stasis The Sonic Accuracy And Clarity Exceeds Standard Class A/b Amplifiers.
• Output Device Technology –Fluid-fets: Mb Quart Output Devices, Fluid-fets Are Painstakingly Selected For Their Ability To Efficiently Produce Power And Mimic The Sound Quality Of The Highest End Home Amplifiers.
• Heat Sink –Heavy Duty Heat-sink Efficiently Moves Heat From The Mosfet Where It Can Be Cooled
• Power Supply –Rugged Mosfet Pulse Width Modulation Power Supply: Allows Amplifier To Product Efficient Power Without Taxing The Vehicle Electrical System
• Output Connections –Heavy Duty Connections Allow For Secure Electrical Signal To Pass Into Wiring And Resist Erosion Which Will Add Longevity To The Amplifier
• Connection Type –Secure Connection For All Power, Ground And Speaker Connections.
• Led System Protection Circuitry Diagnostics –Monitor Overload And Speaker Short Protection With Illuminated Indicators On The Amplifier End Panel

Specifications:

• Class: Class Sq (Class A/b)
• Total Channels: 4
• Power @ 2 Ohms: 4 X 50
• Power @ 4 Ohms: 4 X 100
• Crossover: Electronic
• Variable High Pass Crossover 12db Per Octave
• Bass Boost: 0-9db
• Variable Voltage: .02 – 9v
• Signal To Noise: >90
• Frequency Response: 10hz-45khz
• Total Harmonic Distortion (Thd): <0.5%
• Speaker Level Audio Inputs: Rca Jack
• Power Terminal 12v/gnd: 4 Awg
• Speaker Terminal Wire Gauge: 12 Awg
• Fusing: 20a X 2

• UPC: 806576230120
• Weight: 10
• Authorized Internet Dealer